Jet Wash

Ceccato always puts the customer’s need first, reflecting this approach in the production line and variety. Self service Ceccato Units product line offers compact options of a base unit, as well as an elegant professional system of 2 to 6 self-service bays to meet any car-wash demands. Each system utilize Ceccato traditional approach towards quality, having all the components produced within the high European standards in Italy, at Ceccato’s own facilities; innovative technology within the technical cabinet yet easy to understand operative features. Each unit has additional option (such as water heater, hub cap washing program, special foam canon program, coin safety system, remote control etc.) available for adding and upgrading standard features (technical cabinet, technical room, high-pressure wand) to customize each unit according to a specific location and needs. The system is both sophisticated and easy-to understand and operate. Optional features can be combined, amended, along with the recommendation from Ceccato specialists for the best solution to your specific car-washing demands. You are able to view the exact features of the unit, assess its suitability to your conditions and needs and get all the necessary information to make a decision. The Jet Wash line is presented with the models Easy and Labrador, which utilizes up to 2 bays and from 2 to 6 bays accordingly. You can find the examples how each system operates in reality along with all the necessary project documentation and technical features description below.

Jet Wash

Sort by date rating

Easy

Efficient and easy to use

Easy is the perfect solution for self-service systems due to its simplicity and reliability. With such features as compact and cost-efficient, Easy car washes surpass the other types in profitability. Easy self-service system with entry-level technology in the Ceccato range has one or two wash bays and maximum modularity. The device is enclosed in a stainless steel case. Doors are painted with pre-galvanized carbon steel. This self-service system accepts coins or tokens, after which the operator can wash the vehicle by selecting 5 washing steps.

THE VALUE OF ESSENTIALITY

The technical solutions proposed by CECCATO are substantially the following:

EASY 1 Technology for self-service washing bays mounted into a technical cabinet. In this case, all the technical equipment is contained inside a galvanized and painted “Singlebay" cabinet (RAL7035 White) or other optional colours.

EASY 2 Technology for self-service washing bays mounted into a technical cabinet. In this case, all the technical equipment is contained inside a galvanized and painted “Doublebay” cabinet (RAL7035 White) or other optional colors.

SELF-SERVICE TECHNOLOGY

The technical equipment has been designed to meet modularity requirements.

Several units can be distinguished:

  • Optional unit for water treatment (water softener and osmosis);
  • High-pressure unit with pumps and distribution manifolds (Std);
  • Water heater (Std);
  • Electrical panel (Std).

The technology provides:

  • Commercial solenoid valves easily available and easy to dismantle;
  • Dedicated dosing pumps (2 for each bay);
  • Chemical injection system near each pump suction, with the possibility of injecting the chemical indifferently into hot, osmotized or softened water;
  • High-pressure piston pumps (one for each bay) with a 2.2 kW motor, mounted on anti-vibration dampers with by-pass valve and safety valve;
  • Electrical panel for checking all the system functions.

MAIN COMPONENTS

  • Hot-galvanized and painted single-bay technical cabinet with internal electrical heating with temperature control, equipped with holes for transport by lift and clamps to fix on the ground.
  • High-pressure pump 100Bar 12l/minute, 140 Kw, mod. “INTERPUMP”.
  • 4-8 pole, 2,2 W motor/s, 100LA HP3 220/380 50 Hz motor. IP 55 cable shaft.
  • Electric dosing pumps (shampoo and wax).
  • IP 55 electric system.
  • Frost protection device, wiping lance (to avoid ice through pipes).
  • Inner independent frost protection device equipped with electrical resistor and control thermostat.
  • Containers for chemical products.
  • Electric panel with PLC for multifunction control.
  • Osmosis group with a production of 200l/h and a 100-liter container for the osmosis water with softener group.
  • Electric water heater 4,8 kW.
  • 360° rotating boom to support and bear high-pressure pipe and spray-gun.

MACHINE COMMAND PANEL

  • Token or Coin Acceptor
  • Time/token display
  • Lit program selection buttons
  • Emergency stop button
  • Lit network pilot light
  • Lit “Out of service” pilot light
  • An internal Token/coin collection container

TECHNICAL FEATURES

  • Water supply pressure: 0,08÷0,25 Mpa (0,8÷2,5 bar)
  • Mains water connection: 3/4 "
  • Supply voltage: 400/230V ± 10%  50 Hz, 3/N/PE
  • Installed electric power:  8 kW
  • Absorbed current (400V): 12A
  • Water consumption: 12 litres/min
  • Dimensions in mm: 1245 x 650 x 2100
  • Load-less weight: 300 Kg

WASHING PROGRAMS

The standard washing programs are as follows:

  • Washing – carried out with a lance, softened hot water and shampoo;
  • Rinsing – carried out with high-pressure lance with cold water;
  • Waxing – performed with medium pressure lance with softened water and wax;
  • Rinsing with osmosis – is carried out with a medium pressure lance with demineralized water obtained with a reverse osmosis system.

The washing phases can be used by the user at will, even within the time made available by each individual token. The lifetime of the single token is set electronically by a program. The setting of the washing programs or phases can be changed via an operator panel.

It is possible to integrate the washing cycle with 2 further phases (optional):

  • Brush program. It is the washing program that involves the use of a specific brush, for cleaning the vehicle combined with a low-pressure supply of shampoo and hot water.
  • Wheel rims program. It is another washing program that provides the use of a different lance for the delivery of a specific product for cleaning and degreasing alloy rims.

OPTIONAL PROGRAMS

  1. FLEX SYSTEM BRUSH. With this accessory, at the expiry of the time/token, the end of the brush loses stiffness making it impossible to use the brush again, unless you insert another token.
  2. WATER TREATMENT. Water softening is a process that eliminates or significantly reduces water hardness through the use of ion-exchange resins that retain calcium and magnesium ions. These elements, which mainly determine the hardness of water, if they exceed certain concentrations, precipitate forming limescale deposits, as well as inducing a greater consumption of detergents.
  3. OSMOTISED WATER GENERATOR. A device that allows eliminating most of the salts present in the water, avoiding any deposit of limescale on the car and allowing an optimal final rinse. The 200 lt/h model is used for EASY2 technology. The osmotic water is produced by a plant based on the principle of reverse osmosis in which the solvent molecules pass from the most concentrated solution to a less concentrated solution, obtained by applying a higher pressure than the osmotic pressure to the more concentrated solution.

Easy self-service washing system is the entry-level in the Ceccato range but such features as simplicity, reliability, compact and cost-efficient qualities make its popular in the market.

 

 

Labrador

The ultimate self-service system

A great variety of configuration choices and programs in a cabinet or technical room, with a new, elegant look makes Labrador the ultimate self-service system with international success. Thanks to the flexibility and modularity with up to 6 open or closed bays the Labrador Self-Service Washing Center provides the customer with a consolidated and reliable technology. Design and customization are developed in compliance with the urban architecture context. The controls and maintenance are facilitated by a centralized computerized system that allows checking the operation of each bay.

STANDARD FEATURES:

  • compact cabinet painted in RAL 7035 housing all the system technology
  • technology placed in a dedicated room, for easy maintenance and installation of optional components at later stages
  • high-pressure unit up to 120 bar with pump and distribution manifolds

OPTIONAL FEATURES:

  • water treatment to prevent limescale
  • water heater
  • special low-pressure water and shampoo dispenser brush
  • wand to dispense the specific product for cleaning and degreasing alloy wheels
  • timed system for brush use
  • foam streamer with spectacular effect for removing dirt without streaks
  • system for activating the lights in the wash bays 
  • pump for activating continual water cycle to prevent freezing
  • centralized coin/token extraction with a strongbox
  • system for monitoring the washing bay from other sites through a sim card

TECHNICAL CABINET

Labrador Technology for self-service washing bays can be mounted into a Technical Cabinet. In this case, all the technical equipment is lodged inside a galvanized and painted cabinet with CECCATO standard colors, or in a stainless steel cabinet. Depending on the technology to be installed it will be necessary to use a single cabinet (left) or a double cabinet (right).

TECHNICAL ROOM

Labrador Technology for self-service washing bays can be installed into a Technical Room. In this case, the equipment is lodged into a technical room 2.5 or 5 meters wide and 6 meters deep. This is placed between the bays in the standard configuration. Alternatively (if technically possible) it can be placed at the head of the washing bays.

WASHING ACTION

Step 1: phase of shampooing in high or low pressure (depending on the configuration of the machine, the shampoo will be dispensed in low or high pressure);
Step 2: high-pressure rinse phase, with softened water;
Step 3: phase of wax delivery;
Step 4: the last rinsing phase with osmotic water. The lance operates with a special bypass that allows the user to reach the maximum operating pressure gradually.

It is possible to integrate the washing cycle with 2 further phases (optional):

  • Brush program. It’s the washing program that provides the use of a specific brush for cleaning the vehicle, combined with a low-pressure supply of shampoo and hot water.

  • Wheel rims program. It is a further washing program that provides the use of a lance specifically for the delivery of a chemical product for cleaning and degreasing alloy rims.

FLEX SYSTEM BRUSH
With this accessory, at the expiry of the time/token, the end of the brush loses stiffness making it impossible to use the brush again, unless you insert another token.

SPECIAL CANNON MOUSSE PROGRAM
With this program, the special lance delivers an active foam that, in addition to lifting dirt, makes the brush action more lubricated, eliminating any risk of scratching the bodywork.

WATER TREATMENT
Water softening is a process that eliminates or decreases water hardness through the use of ion-exchange resins, that retain calcium and magnesium ions. These elements, which mainly determine the hardness of the water, if exceed certain concentrations, precipitate forming limescale deposits, as well as inducing a greater consumption of detergents.
The double resin column water softener group consists of:

  •  n° 2 fiberglass cylinders;
  • cationic resin with high exchange capacity, with excellent regenerative and kinetic efficiency and good chemical-physical and thermal stability;
  • n° 1 Fleck 9000 automatic volumetric valve that controls the working and regeneration phases of both columns;
  • n° 1 self-supporting brine vat, in flat-bottom polyethylene, with lid closure. Equipped with cockpit and elbow for overflow;
  • 25 kg bags of salt for the regeneration of resins;
  • n° 1 kit for hardness measurement in the field.

Each element of the Labrador system has been designed to make the use of materials easy. The customer can choose, through the control panel, between a maximum of 7 programs depending on the configuration of the machine. Clear messages and signals guide the user during each washing phase to obtain a better final result. Each bay is equipped with light and handy lances. There are four types of lances available: one with a delicate brush to better remove traces of mud, insects and smog film from vehicles; one with a high pressure water jet for washing and rinsing operations; one dedicated to the application of specific detergents to deliver a foamed chemical both for a scenic effect and a washing effect. Moreover, the possibility of using softened and osmotic water ensures an optimal cleaning result of the vehicle. This professional system has a variety of configuration choices and programs in a cabinet or technical room, with a new, elegant look.